Eventor

I think this is an informative post and it is very useful and knowledgeable. Therefore, I would like to thank you for the efforts you have made in writing this article. But do you know about the “How To Connect Hp Printer To New Wifi Network” issue? No? This will help you.

In case you cannot locate your Canon printer after reaching the official sites or other then you can use the USB for setting up the canon tr8520 printer setup. You can also visit the ij start canon for taking the help. Well, here are the steps you need to follow to setup canon printers using USB:

1. First of all, you need to make sure that you have a USB cable.
2. From the web browser and go to the ij.start.canon setup website and choose setup network connection via USB.
3. The next step is to wait for the Canon ts8220 software to connect the printer to the PC with a USB cable.
4. Click on the “Next” button and get the driver for your printer and check whether you want to connect the printer to one network.
5. Tap on the “Yes” and hit on the “Complete” button and then tap on the “Add printer” option.
6. You have to click on the “Add” button and get the driver from the ij.start.canon site.
7. Go to the Device setting and then tap on the LAN settings and choose the connection.
8. Install the Canon drivers, inkjet cartridges, and then check the connection for your device.
9. You can configure the canon printer and try to print.

How to print with ij.start.cannon on Windows 10?

If you wish to print the ij.start.canon setup on Windows 10, then you need to follow the steps that are given below:

1. The first step is to check whether the Canon printer is turned on.
2. Just load the paper of the appropriate size in the input tray after extending it.
3. Open the Printer Driver setup window on your system.
4. Select the profile that you use frequently.
5. Just choose the Quick setup tab from the commonly used settings option.
6. On choosing the printing profile of ij.start.cannon setup, the Additional features, Media Type, and paper size values to their original values.
7. The print quality should be set to High, Standard, or Draft based on your need.
8. Tap on the “OK” option to save the settings.
9. Open the document that you want to print by using the Canon printer and go to the “ij.start.cannon” tab.
10. Just select the Print option to print your documents.